JavaScript är inaktiverat. För en bättre upplevelse, vänligen aktivera JavaScript i din webbläsare innan du fortsätter.

Svara på tråd

Meddelande: <blockquote data-quote="Tobler" data-source="post: 1240107" data-attributes="member: 138314">[URL unfurl="true"]https://www.sparkrandd.com/faqs/[/URL]All Spark R&D bindings are compatible with Spark Pucks, Spark Canted Pucks, Voile Pucks (Regular or Canted) and Burton Channel Pucks, as well as Spark Solid Board Pucks and Spark Solid Board Canted Pucks mounting plates. Note: The use of Spark bindings on any other manufacturer’s puck system not listed here is not recommended and may void your warranty.If you have Voile pucks check your puck installation and make sure the Inline Disc (One Slot) is on the heel side of your board and the Parallel Disc (Two Slot) is on the toe side. For stance angles between roughly -12° and 12° the “A” on the Inline Disc should point toward the board centerline.  For steeper angles, the “B” should point toward the board centerline. This Board Setup page has suggestions for getting your board and bindings just right.If you have Spark Pucks simply loosen the puck screws and use your guide or baseplate to adjust your position accordingly. There is a setup and user guide in the specs section of the Spark Pucks page.</blockquote>